Author Topic: cd-rom problems  (Read 2283 times)

weekapaug19

  • In the house
  • Hero Member
  • *****
  • Posts: 2350
    • http://www.phishhook.com/lists/weekapaug19
cd-rom problems
« Reply #15 on: November 21, 2005, 07:59:56 am »
bump for anybody who may have missed this who could advise
"I don\'t know if it\'s an A-sharp or a B-Flat.......If you get this wrong, we\'ll all B-Flat"  -The Goonies

GoldnRd

  • Jr. Member
  • **
  • Posts: 85
    • http://db.etree.org/GoldnRd
cd-rom problems
« Reply #16 on: November 21, 2005, 11:05:16 pm »
Not booting after added RAM is a common issue.   Try putting one stick of RAM in at a time to try and determine if there is an issue with one of the sticks or slots.   Are you getting anything on the screen with the new RAM in it?

As far as an fdisk prompt.   Don\'t play around with that.   It "reset" your computer\'s hard drive forcing a reinstall of windows and losing everything.   In windows try doing a disk check to see if there are any errors on your hard drive.

What kind or error are you getting when you try to burn a cd?   Memory speed should not be an issue as the new memory isn\'t really all the faster then the old stuff, there is just more of it.

OrganicNugz

  • Newbie
  • *
  • Posts: 35
memory speed?
« Reply #17 on: November 22, 2005, 12:48:18 am »
Quote from: weekapaug19
bump for anybody who may have missed this who could advise

It could be that the memory you purchased is PC133 and your system was designed for PC100 so it could be a compatibility issue...if you put your old memory back in and it boots up than that is probably the issue.

But reading the rest of this it would seem entirely possible that you may have messed something else up with your recovery cd\'s.

If your old memory works than I\'d return the new stuff you bought and exchange for PC100. And then I\'d try to not rely on a music forum for your tech support issues!!!!  

Good luck!

weekapaug19

  • In the house
  • Hero Member
  • *****
  • Posts: 2350
    • http://www.phishhook.com/lists/weekapaug19
cd-rom problems
« Reply #18 on: November 22, 2005, 08:00:15 am »
Quote from: OrganicNugz
Quote from: weekapaug19
bump for anybody who may have missed this who could advise

It could be that the memory you purchased is PC133 and your system was designed for PC100 so it could be a compatibility issue...if you put your old memory back in and it boots up than that is probably the issue.

But reading the rest of this it would seem entirely possible that you may have messed something else up with your recovery cd\'s.

If your old memory works than I\'d return the new stuff you bought and exchange for PC100. And then I\'d try to not rely on a music forum for your tech support issues!!!!  

Good luck!


Thanks for the advice, but these music folk know ALOT about computers
"I don\'t know if it\'s an A-sharp or a B-Flat.......If you get this wrong, we\'ll all B-Flat"  -The Goonies

OrganicNugz

  • Newbie
  • *
  • Posts: 35
cd-rom problems
« Reply #19 on: November 23, 2005, 01:23:56 pm »
Quote from: weekapaug19
Thanks for the advice, but these music folk know ALOT about computers


I was trying to be humorous rather than critical, the dangers of neglecting to add the ;-)

Not questioning others knowledge, interested to know how it turns out for you...

have a good holiday!

peace,

bc

weekapaug19

  • In the house
  • Hero Member
  • *****
  • Posts: 2350
    • http://www.phishhook.com/lists/weekapaug19
cd-rom problems
« Reply #20 on: November 23, 2005, 01:51:16 pm »
actually, you were right with the PC133 and PC100 advice.  The burner works great and I\'m gonna go out and try to get some new ram that hopefully will work in my machine.  Thanks for the help!
"I don\'t know if it\'s an A-sharp or a B-Flat.......If you get this wrong, we\'ll all B-Flat"  -The Goonies